Flexible 1 Part RS Adhesive (Grey)

Fix wall and floor tiles quickly and securely with our high quality flexible 1 part adhesive. This rapid set tile adhesive can be used with both natural stone and engineered tiles, as well as wooden flooring. The range of tiles compatible with this adhesive includes:

• Porcelain
• Ceramic
• Slate
• Quartz
• Limestone
• Travertine
• Marble
• Granite

This waterproof adhesive can be used with underfloor heating systems. The adhesive conforms to British and European standards for indoor and outdoor areas.

Our adhesive is really easy to apply:
Firstly, make sure the surface you are about to tile is clean, dry and strong enough to support the weight of the tiles and adhesive.

Because it is a one part adhesive it does not require any additional admix. All you need to do then is simply mix the adhesive powder with cold, clean tap water until you are left with a smooth, creamy and consistent texture. This will set in 40 minutes so mix only enough to use within this time.

Now apply the adhesive to the floor by using a trowel, ensuring a continuous bed of adhesive between 3mm and 6mm is achieved when tiles are applied. Apply adhesive to the back of deep studded tiles in order to cover the studs. Make sure the adhesive is still moist before pressing tiles into place.

Once the job is complete; clean surplus adhesive from the tiles and joints. You then have to wait just two hours before you can apply the grout.

Instructions are given as a guideline only, for your specific project needs please follow full instructions given on the bag

© 2013 Tiles Porcelain Ltd. All rights reserved